PHEV电池电荷状态估计设计及仿真

电池管理系统(battery management system,BMS)是混合动力汽车(parallel hybrid electric vehicle,PHEV)能量管理系统中的核心组成部分,而其中电池电荷状态(state of charge,soc)则是PHEV控制策略中的重要参数.针对PHEV动力电池组SOC系统高度非线性和复杂性的特点,提出了一种基于改进的BP神经网络的HEV动力电池组的实时SOC估计,并对网络的收敛性进行了证明.利用大量PHEV动力电池组在行驶过程中充放电的数据样本,对神经网络进行网络训练并且进行仿真.结果表明,与传统离线SOC估计方法相比,能够有效地减小误差,提高电池SOC的精度.     

火箭悬浮深弹拦截尾流自导鱼雷研究

为了分析了水面舰艇发射火箭悬浮深弹拦截潜射尾流自导鱼雷的作战使用问题,首先,概括了潜射尾流自导鱼雷的攻击原理。其次,介绍了水面舰艇针对尾流自导鱼雷的弹道预测原理以及鱼雷提前角估算数学模型,在此基础上,进一步建立了火箭悬浮深弹拦截鱼雷的射击要素求解模型。最后,进行了仿真检验,归纳了火箭悬浮深弹射击提前角随相关参数变化的分布规律。研究结果对火箭悬浮深弹拦截潜射尾流自导鱼雷的作战使用具有指导意义。     

22 nm全耗尽型绝缘体上硅器件单粒子瞬态效应的敏感区域

基于3D-TCAD模拟,研究了22 nm全耗尽型绝缘体上硅(fully depleted silicon-on-insulator,FDSOI)器件单粒子瞬态(single-event transient,SET)效应的敏感性区域。对比了使用单管和使用反相器来研究器件SET敏感性区域的方法,从而分析实际电路中重离子轰击位置对22 nm FDSOI器件SET敏感性的影响,并从电荷收集机制的角度进行了解释。深入分析发现寄生双极放大效应对重粒子轰击位置敏感是造成器件不同区域SET敏感性不同的原因。而单管漏极接恒压源造成漏极敏感性增强是导致单管与反相器中器件SET敏感区域不同的原因。修正了FDSOI工艺下器件SET敏感性区域的研究方法,与单管相比,采用反相器进行仿真,结果更符合实际情况,这将为器件SET加固提供理论指导。     

Reaction characteristic of PTFE/Al/Cu/Pb composites and application in shaped charge liner

In this paper, the reaction characteristic and its application in shaped charge warhead of a novel reactive material, which introduced copper (Cu) and plumbum (Pb) into traditional polytetrafluoroethylene/aluminum (PTFE/Al), are studied. The thermal analysis and chemical reaction behavior of the PTFE/Al/Cu/Pb mixture are investigated by Differential Scanning Calorimetry (DSC),Thermo-gravimetry (TG), and X-ray Diffraction (XRD) techniques. Then, the shaped charge liners with PTFE/Al/Cu/Pb reactive materials are fabricated, and the X-ray experiments show that they could form reactive jets with excellent performance under the detonation effects of the shaped charge. Based on that, the penetration experiments of shaped charge with PTFE/Al/Cu/Pb reactive liner against steel plates are carried out, and the results demonstrate that the PTFE/Al/Cu/Pb reactive jets could produce a deeper penetration depth compared to the traditional PTFE/Al reactive jets. Meanwhile, the PTFE/Al/Cu/Pb reactive jets also show significant inner-blast effects, leading to dramatically cracking or fragmentation behavior of the penetrated steel plates. This new PTFE/Al/Cu/Pb reactive liner shaped charge presents enhanced penetration behavior for steel targets that incorporates the penetration capability of a high-density and ductility jet, and the chemical energy release of PTFE-matrix reactive materials.     

悬浮式深弹反鱼雷武器系统作战效能试验评估方法

针对悬浮式深弹反鱼雷武器系统的组成及使用特点,提出了对该系统作战效能进行试验评估的基本思路,并依据WSEIAC方法基本原理,构建了定量评估该系统作战效能的基本模型,又通过分析模型中各参数的物理含义及其与系统战术技术指标和使用性能指标间的关系,得出了利用试验鉴定中获取的数据评估系统作战效能的工程化模型。以此为对该武器系统的作战效能进行试验评估探索一种便捷方法。     

双层反应装甲干扰射流影响因素分析

通过对双层反应装甲与射流作用过程进行分析和数值模拟,得到双层反应装甲飞板飞散及与射流作用物理过程,通过模拟结果与物理实验比较可知,数值模拟过程基本正确.同时,利用ANSYS-DYNA针对双层反应装甲不同结构参数与射流作用过程进行数值模拟,分析双层反应装甲两组件距离、与主靶板距离及两组件的夹角对干扰射流的影响,从而为双层反应装甲结构改进及设计优化提供理论参考.     

火箭自导深弹空中段关键指标研究

文中依据火箭自导深弹的组成及攻潜过程,建立了相关仿真模型,在典型条件下,分别采用对目标当前点和对目标提前点两种射击策略,利用蒙特卡罗法仿真分析了弹箭分离高度、入水速度、溅落点散布误差和助飞段平均飞行速度等空中段主要指标对发现概率的影响。仿真结果表明：溅落点散布误差和助飞段平均飞行速度对发现概率影响显著,为火箭自导深弹空中段关键指标;溅落点散布误差控制在200m以内,助飞段平均飞行速度高于250m/s时,具有较高的发现概率。     

鱼雷最大航向估计在反鱼雷中的应用

在悬浮式深弹反鱼雷时,若只能根据声纳兵的经验估计鱼雷距离,如何正确估计鱼雷航向角范围就成为正确布放悬浮式深弹的关键.从直航雷的相遇三角形和尾流鱼雷命中目标条件出发,推导出鱼雷相对舰艇的正常提前角,从而确定鱼雷在被发现点的最大航向角范围,为正确投放悬浮式深弹提供了理论依据.     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

Influence of a liquid-filled compartment structure on the incoming shaped charge jet stability

Liquid-filled compartment structure consists of a bulk steel plate with matrix blind holes which are filled with liquid and a steel front plate to seal up the liquid with rings and bolts.The liquid-filled compart-ment structure can resist the shaped charge warhead effectively.This paper presents experimental and theoretical investigations of the penetration ability of the residual shaped charge jet emerging from the liquid-filled compartment structure after the penetration process at different impact angles.On the basis of shock wave propagation theory,the influence of the liquid-filled compartment structure on jet sta-bility is analysed.The interferences of the liquid backflow caused by a reflected shock wave and a back plate on jet stability under different impact angles are also examined.In addition,the range of the disturbed velocity segments of the jet at different impact angles and the penetration ability of the re-sidual jet are obtained.A theoretical model is validated against the experimental penetration depths.